YOUR ALL ENCOMPASSING SINGLE SOURCE TEST SOLUTIONS PROVIDER

Request Quote
 

750 Test Press

Request Quote
Product Files
This is a small format Manually operated Workpress with a 5” x 7” working area.The fixture is targeted for applications requiring access to less than 50 test points all contacted from one side of the DUT. Supports pitches to 1.0mm.Typical designs will use a PCB mounted under the probes to bring the signals out to client supplied test electronics. This PCB can also be used to integrate test electronics when applicable. Note the Lid of this fixture has a special actuation providing a vertical closing action just before contact to the DUT. This fixture can be designed with or without a floating base holding the DUT. A floating base allows the DUT to be placed in the fixture without contact to the pogo pins until the lid is closed thus pressing down on the DUT and then contacting the pogo pins.