Interfaces to Standard Testers
RTI has developed many complete tester interface solutions, including everything required to interface to remote docking fixtures for use under a microscope, EMI, and other requirements requiring remote access to the test system.
Some of the test systems we have already developed solutions for include:- Credence D10 Series
- HiLevel Systems
- NSC Curve Trace Systems
- Keithley Switch Matrix
- NextTest Maverick
- Thermo Fisher Scientific MK2 and MK4
- Thermo Fisher Scientific Paragon
- RTI series Automated Curve Trace Systems
We are continuously adding new solutions, so please call to see if we have already designed an interface solution for your specific requirement. If you are looking for an interface fixture that is not displayed let us know and we will work with you to build an interface for your equipment!
D10-768-S-XX Interface Fixture
download data sheet
This solution allows the Credence D10 test system to be used for remote testing under a probe station, in a black box, EMI, and other remote locations from the Credence D10. All 768 digital channels, power supplies, and DUBU signals are available from the Credence D10 test system. Power supplies are brought out to high current connectors. The interface between the Credence D10 test system and a remote fixture is through controlled impedance ribbon cables. High performance pogo pin blocks interface the cables to the Interface PCB. The Interface Fixture is designed to also interface to RTI’s D10-768-DS docking fixture described below. This fixture is available in 96 channel increments and is field upgradeable
The D10-768-DS Docking Fixture is designed to sit on a wafer chuck for probing or upside down on an EMI system. Daughter cards (DUT boards) are 6.5 x 8.0 inches. The daughter cards interface directly to the pogo pin cables, enabling very high performance. Loop-back boards are available for system set up and test.
710-512-S Interface Fixture
download data sheet
This solution allows the HILEVEL test system to be used for remote testing under a probe station, in a black box, EMI, and other remote locations from the HILEVEL. All 512 channels are available from the HILEVEL test system. Power supplies are brought out to high current banana jacks. The interface between the HILEVEL test system and a remote fixture is through controlled impedance ribbon cables. High performance pogo pin blocks interface the cables to the Interface PCB. The 710-512-S Interface Fixture is designed to also interface to RTI’s730-512-DS docking fixture described below.
The 730-512-DS Docking Fixture is designed to sit on a wafer chuck for probing or upside down on an EMI system. Daughter cards (DUT boards) are 6.5 x 8.0 inches. The daughter cards interface directly to the pogo pin cables. Loop-back boards are available for system set up and test. The HILEVEL interface DUT board plugs directly into the HILEVEL test system. The handles on the DUT board make removal from the test system easier.