MEGATRACE CURVE TRACER

Our largest curve tracer built for devices and packages with large pin counts, up to 2160 pins.

MegaTrace System Components

Each curve trace model has a different system setup based on your device’s pin count. For the MegaTrace, the model’s system is comprised of a few separate pieces.

MegaTrace Automated Curve Tracer

MegaTrace curve tracer is designed for high pin count devices. MegaTrace typically supports pin counts greater than 625 up to 2160 pins, with 1080 pins being popular. It utilizes the same applications as the smaller models.

The cart form allows for movement around the lab, and custom configurations can be implemented. Each MegaTrace is built with an LCD monitor, controller running essential DataTrace Analysis, and MultiTrace software on the most recent version of Windows.

The MegaTrace is an automated curve tracer used for powered curve tracing, multiple testing configurations, and capabilities. See the curve trace configuration page to learn more.

Electrical & Physical Specifications

  • 4 Precision Drives ±15V, ±lA, 8 Ranges
  • 2 Standard Drives ±15V, ±lA, 1 Range
  • 2 HV Drives ±lO0V, ±l00mA, 5 Ranges

(Half as many drives in a 2 bus configuration. Learn more about configurations here.)

  • 2, 4 or 6 busses
  • Relay and FET switches

(Typically 2 busses are FET and the others are Relays)

  • 625 to 2160pins
  • Upgradeable in 216 pin increments

Standard 2160 pin Elastomer connectors

  • OctoPogo Interface for 1024 pin systems
  • 625 pin ZIF socket (25×25)
  • Opens/Shorts test board (Compatible with MultiTrace adapters)

Banana jacks interface to all drives, busses, and measurement inputs. (Compatible with BNC adapters)

  • Available for Any Packaged Device
  • Cabled Interfaces for Probe Cards
  • Cabled Interfaces for Daughter Cards
  • Standard Trace: Curve Trace Application Program
  • Switch: Switch Matrix fixturing program
  • Standard Trace: Curve Trace Application Software
  • Diagnostic: Self-diagnostic software
  • MTForms (basic): Curve Tracer setup program
  • QA Trace: Test Library program
  • Microsoft Office & Latest Windows

Learn about MultiTrace Suite here

  • 44″(W) x 26″(D) x 41″(H) (from floor to surface) or 56″(H) from floor to top of monitor
  • Weighs 300 lbs Max (Actual weight varies with model)

Contact an Engineer

    Test Applications:

    • Failure analysis
    • Reliability testing
    • Counterfeit device analysis
    • Nondestructive electrical counterfeit test
    • Opens, shorts leakage testing (OSL)
    • Post decap electrical inspection
    • Optical fault localization
    • ESD testing
    • Latch-up testing
    • Supply current measurements
    • And more!

    Additional Features:

    • Cart form for easy movement around the lab
    • 648, 864, 1080, and 1296 pin counts are common
    • Supports bus configurations
      • Custom 8 bus configurations available
    • Custom test fixtures and interfaces available to suit your needs
    • Fixtures have access to all drives and measurement nodes via banana jacks
    • Side panels remove easily for access and service

    Test Applications:

    • Failure analysis
    • Reliability testing
    • Counterfeit device analysis
    • Nondestructive electrical counterfeit test
    • Opens, shorts leakage testing (OSL)
    • Post decap electrical inspection
    • Optical fault localization
    • ESD testing
    • Latch-up testing
    • Supply current measurements
    • And more!

    Additional Features:

    • Cart form for easy movement around the lab
    • 648, 864, 1080, and 1296 pin counts are common
    • Supports bus configurations
      • Custom 8 bus configurations available
    • Custom test fixtures and interfaces available to suit your needs
    • Fixtures have access to all drives and measurement nodes via banana jacks
    • Side panels remove easily for access and service

    MegaTrace DUT Boards

    Below are the supporting board solutions to the different test fixtures. Depending on the fixture or interface you choose above, DUT boards and compatibility vary. Custom compatibility fixtures are available.

    MORE CURVE TRACE SOLUTIONS

    MT Century

    Compact automated curve tracer that supports devices up to 96/100/108 pins.

    MultiTrace

    Mid-sized curve tracer with flexible pin range from 216-1152 pins, with 625 pins being the most popular configuration.

    MegaTrace

    Largest curve tracer built for devices and packages with large pin counts, up to 2160 pins.

    MultiTrace Suite

    Feature-rich software with powerful analytical, ease of use, and efficiency tools that work together to operate our curve tracers and analyze the results.

    DataTrace Pro

    Ultimate curve trace software that compiles data, generate professional reports and charts, and batch compares your data against other files.

    Support & Upgrades

    We stand behind every test solution throughout every stage of its life. Contact us if you have questions or concerns about your test solution.

    QUALITY GUARANTEE

    Robson Technologies, Inc. interconnects, fixtures and systems are carefully designed, manufactured, inspected, and individually tested prior to shipment. In the unlikely case you find a defect in materials or workmanship, we will promptly repair or replace the component.

    CONTACT US

    Do you need help finding a test solution? Get in touch with an RTI Engineer!

    OFFICE LINE

    1.408.779.8008

    EMAIL

    rtisales@testfixtures.com

    OFFICE HOURS

    8:00am – 5:00pm PT

    OFFICE LINE

    EMAIL

    rtisales@testfixtures.com

    OFFICE HOURS

    8:00am – 5:00pm PT